Expose the options to enable 802.11k & 802.11v for each SSID to enable better client roaming and 802.11r to allow fast transitions between AP.
I used 802.11k and 802.11v on my previous IAP-205 installation and clients roamed quick and smoothly, but I find with AIO and lack of 802.11k/v that when roaming between AP, my phone disconnects, switches to LTE for a couple seconds, then reconnects to wifi. You used to be able to walk around with a live Facetime call and it would never drop.
Thanks @GThiesen , do you think you could confirm with the product team that 802.11r is enabled by default? Because looking at the copy of the logs I collected for support, troubleshooting a previous issue, "Advertise 802.11r Capability" and "Advertise 802.11k Capability" are both set to Disabled for all of my SSID profiles.
- WAP2 person > without 802.11r
- WAP3 enterprise > without 802.11r
- WAP2 enterprise > YES, with 802.11r
There is no use of SAE/ECC in WPA3-Enterprise and no standard support for fast roaming (802.11r). "