Hello community:
Switch: 1930 24G (JL682A)
Firmware: 2.9.1.17
I have a very old device that does not work on all ports. The connection is 10 Mbps half duplex. The problem is independent of auto negotiation.
Ports:
- 13 working
- 14 working
- 15 not working
- 16 not working
- 17 working
- 18 working
- 19 not working
- 20 not working
I have a second 1930: the device is working on the exact same ports.
Further Tests:
1930 --- (1 GB)-- > 1810 ---10 Mbit HD--> device:
the device is working on all ports of 1810. The 1810 is working on all ports of 1930
1930 --- (forced to 10 MBit HD)-- > 1810 ---10 Mbit HD--> device:
The 1810 is working on all ports of 1930.
Any ideas?
Thanks
Andi
------------------------------
Andreas Sachs
------------------------------