Good morning,
I am currently building a new network in the company with the 1930 Switch.
In theory, the network is rather simple.
However the difference in logic and naming as well as config of the 1930 makes it quite a bit different when coming from cisco devices, hence why I truly need the help of the community <3
Here is the details of what I want to build. Note, the switch needs to be also the dhcp server for Network B NOT Network A.
Network A --> Internet connection, connected via Port 25 SFP+ 10Gbps to a Cisco SFP+, which is connected to the router for the internet <--- This works fine! - 192.168.178.xxx/24
Network B --> Port 23 & Port 24 are both connected to their respective Dell 48-Port Switches which run our Computerlab with 80 connections.
Network B must have IP 10.10.x.x/16 with daily DHCP lease purge.
Network B must connect to the internet via Network A i.e. Port 25
Network B must have communication with the devices in Network A i.e. our Server.
Seems simple enough, but for the love of networks, I can't get it to run after a week of fiddling around with the settings and static routes and vlans.
I would sincerely appreciate your help on this!
------------------------------
Sacha Weichel
------------------------------